Controlling The Projector Via Your Web Browser - Hitachi WNM80 User Manual

Controlling the Projector via Your Web Browser

You can use your Web browser to remote control the projector once the WNM80 module is properly
configured and connected to your PC via the wireless LAN card or by a cable-base LAN connection.
NOTE
Do not attempt to control the projector with the projector's remote control and via your Web
browser at the same time. Attempting to do so may result in a projector error.
How to Use the Remote Control Panel
1. Open your Web browser (Microsoft™ Internet Explorer®, etc.) and enter the following address:
2. Open LiveViewer.
Click on the PROJECTOR button. A list of
available projectors will be displayed.
Right click on the projector you wish to
control and then select Remote
Controller.
The WNM Projector Remote Controller panel will be displayed as shown below.
Click on Compact to display the links to the four main menus
<Compact Setting Status Wireless>.
A description of each of these menus can be found on the following pages.
http://192.168.100.10
Enter the IP address you configured the WNM80 module.
PROJECTOR button