Hitachi WNM80 User Manual page 20

Introduction (continued)
Next, let's make sure that your PC and the WNM80 module are communicating okay.
• Open your Web browser (Microsoft™ Internet Explorer®, etc.) and enter the following
address:
http://192.168.100.10/projectorcontrol.htm
This is the factory default setting.
If you see the Remote Control panel as shown on the right, then everything is configured okay.
NOTE
If you only enter the IP address into your Web browser's
address bar, the following dialog will appear. In this case,
simply click on Remote control link to bring up the Remote
Control panel.
Remote control
LAN settings