Loading A Document; G Using The Reversing Automatic Document Feeder; G Using The Document Glass; Using The Reversing Automatic Document Feeder - Sharp AR-FX10 Operation Manual

LOADING A DOCUMENT

A document can be loaded in the reversing automatic document feeder or on the document glass. Use the reversing
automatic document feeder when faxing a large number of sheet originals. Use the document glass to fax originals
that cannot be scanned using the reversing automatic document feeder such as thick or thin sheet originals or bound
originals such as books.

USING THE REVERSING AUTOMATIC DOCUMENT FEEDER

1 Lift the document glass cover and make
sure a document is not placed on the
document glass. Gently close the cover.
2 Adjust the document guides on the
document feeder tray to the width of the
document.

USING THE DOCUMENT GLASS

1 Open the document glass cover, and place
the document face down on the document
glass. Gently close the cover.
Original size detector
NOTE
Do not place any objects under the original size
detector plate. Closing the document glass cover
with an object underneath may damage the original
size detector plate and prevent correct detection of
the document size.
3 Align the edges of the document pages
and then insert the stack in the document
feeder tray so that the first page is face up.
Regardless of the size of the original, place the
original on the left side of the document glass. (Align
the original with the document glass scale and
centring mark.)
Place the original in the appropriate position for its
size as shown below.
Document glass scale
mark
A4 A3
B5
B4
A5
Insert the stack into the
document feeder tray until
it stops.
Document glass scale
mark
A4
R
B5
R
A5
R
1-7
1