Using An Extension Phone; G Sending A Fax After Talking (Manual Transmission); Sending A Fax After Talking (Manual Transmission) - Sharp AR-FX10 Operation Manual

USING AN EXTENSION PHONE

You can connect a telephone to the machine and use it as an extension phone to place and receive calls like any
normal phone. You can also activate fax reception from the phone (remote operation).
NOTE
If you connect a combination telephone/answering machine to the machine, you will not be able to use the
answering machine function.

SENDING A FAX AFTER TALKING (MANUAL TRANSMISSION)

If the other fax machine is set to manual reception, you can talk to the other party and then send a fax without
breaking the connection. This procedure is called manual transmission.
NOTE
Automatic redialing (see "If the receiving party is busy" on page 2-5) will not take place if the line is busy.
1 Make sure the machine is in fax mode.
to return to the initial screen of fax mode or
scanner mode, whichever mode was selected
last. To switch to fax mode from scanner mode,
touch the [SCANNER/FAX] key (see
1-4).
2 Load the original. (see page 1-7)
NOTE
If you have loaded the original on the document glass,
you can only send one page by manual transmission.
3 Set the original size, resolution, exposure
and other scanning conditions as needed.
G MANUALLY SETTING THE SCANNING SIZE
(see page 1-8)
G SELECTING THE RESOLUTION (see page 1-9)
G SELECTING THE EXPOSURE (see page 1-10)
5-2
When the [IMAGE
SEND] key light is on, the
machine is in fax mode. If
the light is not on, press
the [IMAGE SEND] key.
When the network
scanner option is
installed, touch this key
on page
8
4 Lift the extension phone.
The [SPEAKER] key can also be used. (See "One-
touch dialing" on page 1-11.)
Dial the number of the other party or touch
5
a one-touch key.
SPE
CORPO.TPS
SHARP GROUP
You cannot use a group key or a one-touch key
that includes a sub-address and passcode.
6 Speak to the other party when they
answer.
If you used the [SPEAKER] key to dial, lift the
extension phone to talk.
After the other party switches to fax
7
reception, press your [BLACK COPY
START] key.
Replace the extension phone.
8
If the condition settings
screen appears, touch
the [ADDRESS
DIRECTORY] key to
display the address
directory screen (see
page 1-4).
Transmission begins.