10Base-T (Utp) - Sharp JW-20FL5 User Manual

Chapter 15: Appendix

[2] 10BASE-T (UTP)

(1) How to create a 10BASE-T (UTP) cable
Strip the sheath on a 10BASE-T (UTP) cable
Cut the sheath 40 mm away from the end and
untwist the cables. Lay them out in the same
order as the terminals.
Normally, you use a straight cable.
Cut the signal lines in a 10BASE-T (UTP) cable
Cut the signal lines 14 mm away from the sheath using a nipper.
15
40 mm
14 mm
15-56
Terminal arrangement
T568B T568A
Normal
Cross cable
(straight)
8 Brown Brown
7 White/brown White/brown
6 Green Orange
5 White/blue White/blue
4 Blue
3 White/green White/green
2 Orange Green
1 White/orange White/orange
Blue