[3] Connection of Z-336J
(1) When connecting to a 10BASE5
This paragraph describes how to connect 10BASE5 cable to the Z-336J.
Connecting the transceiver cable
Z-336J
1 Slide the lock on the 10BASE5 connector (on the Z-336J) up.
2 Insert the connector so that the two locking posts on the cable connector match the holes on
the slide lock.
3 Slide the lock down to lock the cable connector.
Slide lock
10BASE5 connector
1
3
Cable connector
2
Transceiver cable
Locking post
6-5
Chapter 6: Connection/Wiring
6