Using The Overlay - Panasonic KX-TD308 Installation Manual

4.1.1 Using Proprietary Telephones
Soft 1 soft 2
soft 1 Soft 2
Note

Using the Overlay

System Programming
4-4
Soft 3 SHIFT
Press SHIFT
to alternate
Soft 3 SHIFT
You can use either the soft buttons or the overlay buttons. (For
overlay buttons, refer to "Using the Overlay" below.)
Throughout programming you will see instructions such as "Press
PREV". If you use soft buttons, this means press
SHIFT and then press
you use soft buttons and if programming instructions tell you to press
If
the following buttons, you may press soft buttons shown below.
A programming overlay is packed with the telephone at the factory.
This overlay should be used at all times while in programming
mode since the functions of the telephone keys change while in
programming mode as follows: (The original functions are in
parentheses.)
Soft 1
Soft 1
Soft 3.
The (PREV) function is performed.
Soft 2 Soft 3 SHIFT
Soft 3 SHIFT
Soft 2
SHIFT,
release