4 3 a
System Programming
Description
Selection
Default
Programming
Conditions
Feature References
Caller ID Name Set
With Caller ID Service, the calling party is displayed either by its
ID Code or by its name. If the name display is required, use this
program to give a name to a caller ID Code stored in program [ 1 lo]
"Caller ID Code Set".
001 through 100
Location number:
l
ID Name: 15 characters (max.)
Caller
l
All locations - Not stored
1.
111.
Enter
Display: 111 CALLER NAME
Press NEXT.
2.
Display: Location NO?+
location number.
3.
Enter a
To enter location number 001, you can also press NEXT.
Display example: OO1:Not Stored
4.
Enter a
For entering characters, see Section 4.1.3 "Entering Characters".
To delete tbe current entry, press CLEAR.
To change tbe current entry, press CLEAR and enter tbe new name.
Press STORE.
5.
6.
To program another location, press
SELECT
and the desired
7.
Repeat steps 4 through 6.
Press END.
8.
Caller ID Name corresponds to the Caller ID Codes stored in program
l
[ 1 lo] "Caller ID Code Set".
Each name has a maximum of 15 characters.
l
Section 3, Features
Caller ID
NEXT
PREV,
or
location number.
System Programming
111
or
4-43