4.1.5 Programming Example - Panasonic KX-TD308 Installation Manual

4.1.5 Programming Example

Sample of Description
4.2 Manager Programming@ i
Dial numbers. These numbers are
available to all extension users. There 1 (3) program title.
are 100 numbers from 00 through 99.
Selection tn
Speed dial number: 00 through 99
l
Telephone number: 24 digits (max.) i
l
All speed dial numbers - Not stored
Display: 001 SYS SPD DIALt9) i
2. Press NEXT.""
Display: SPD Code?+'"'
3. Enter a
To enter speed dial number 00,
Display example: 0O:Not
4. Enter a
To delete the current entry, press
CLEAR. (14)
To change the current entry, press
CLEAR
5. Press STORE.""
6. To program another speed dial
number, press NEXT
PREV,
desired speed dial numberzoo
7. Repeat steps 4 through 6. u')
8. Press END. (")
The following programming instructions assume that you have
already entered the programming mode and that you will employ
method (2) on page 4-8.
Example: Program [OOl] "System Speed Dialing Number Set"
I I
I
I
speed
dial number.
,
telephone number. aa
and the new number.
or
SELECT and the
or
(16) Select the best way for you to store another speed
I
I
Explanation
(1) Program address: This address is printed at the top
of every page to allow you to quickly find the
desired program.
belongs to.
program.
While programming, use the overlay.
l
Before starting to program, enter the
l
programming mode. (See "Entering the
programming mode" on page 4-6.)
telephone has soft buttons, the lower line shows
the functions that are currently assigned to them.
or the NEXT shown on the overlay.
number.
the number is displayed.
Your entry is displayed as you enter the digits.
The indicator lights red and a confirmation tone
lets you know that storage is complete.
dial number. Pressing the NEXT / PREV allows
you to select the next higher / lower speed dial
number. You can also keep pressing them until the
desired one is displayed. If you
System Programming
SELECT
press
4-13