Account Codes - Panasonic KX-TD308 Installation Manual

System Programming
4 3
l
Description
Selection
Default
Programming
Conditions
Feature References
A c c o u n t C o d e s
Assigns the account codes for Account Code Entry, Verified - All
Calls and Verified - Toll Restriction Override modes. If Verified -
All Calls is assigned in program [508] "Account Code Entry
Mode", an account code is required to make an outside call. If
Verified - Toll Restriction Override is assigned, an account code is
only required for a toll call and overrides toll restriction.
Location number: 01 through 20
l
Account code: 10 digits (max.)
l
All locations - Not stored
1.
Enter 105.
Display: 105 ACCT CODES
2.
Press NEXT.
Display: Location NO?+
3.
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 0l:Not Stored
4.
Enter an account code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new account
code.
5.
Press STORE.
6.
To program another location, press NEXT or PFUW, or
SELECT and the desired location number.
7.
Repeat steps 4 through 6.
8.
Press END.
Each verifiable account code has a maximum of 10 digits, consisting of
l
0 througll9.
Program [508] "Account Code Entry Mode" is used to select the
l
Account Code Entry mode.
Account codes having "99" in any part or ending with "9" are invalid,
l
as '99" is used as a delimiter when entering an account code.
Section 3,
Features
Account Code Entry
Toll Restriction Override by Account Code Entry
105
System Programming
4-37