Table of Contents
Advertisement
Section 700 - Operation
Account Codes
You can assign account codes to clients to facilitate billing and to track call
dates and times, numbers called, and outside line numbers used. This
information is printed for each account on the SMDR record.
Non-Verified Account Codes
(CPC-A, CPC-AII, and CPC-B Versions prior to 3.1 and 6.0 and higher)
Description
In CPC-A and CPC-B Versions prior to 3.1, account codes are not verified.
With CPC-AII and with CPC-B Versions 6.0 and higher, account codes may
be verified or non-verified depending on system programming.
Non-verified account codes can be forced or voluntary, depending on
extension programming.
With voluntary account codes, the user is not forced to enter an account code
before making a call. With forced account codes, the user must enter an
account code before accessing an outside line.
Non-verified account codes can be assigned to incoming and outgoing calls.
To assign an account code to an outgoing call, the user enters the account
code before making the call or during the call. To assign an account code to
an incoming call, the user enters the account code during the call.
To enter an Account Code before dialing:
1. Press the ON/OFF key.
2. Press the AUTO key, then press "#."
3. Enter the Account Code (up to 10 digits).
4. Press "#."
DBS-2.3/9.2-700
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
• "Enter Account #" appears on the display.
• If you are using a Single Line Telephone (SLT) or Digital Single Line
Telephone (DSLT), dial "#7."
DBS Manual - Revised April 2000
Chapter 3. System Features
Page 3-3
Hide quick links:
Advertisement
Table of Contents
