Panasonic VB-44210G User Manual page 56

Chapter 3. System Features
4. Enter the four-digit auto set relocation code assigned to extension 200.
5. Replace the handset.
To Reactivate Extension 300:
1. Unplug the extension cable from 300.
2. Reconnect the cable.
Related Programming
• FF3 (Extension): Auto Set Relocation Code
Considerations
• The following types of data can be transferred using this feature:
• Settings may not be transferred between extensions of different types. In
• Attendant 1 is excluded from this feature.
Page 3-10
• All programmed extension features and TRS settings from 200 are
transferred to 300.
• Extension 300 are placed out of service.
Extension 300 assumes all extension features, TRS, and LCR settings that
were initially assigned to 200.
- TRS type settings
- Ring settings (trunk line, remote ringing, day/night, DID)
- FF key data
- Extension numbers and names
- System call forward settings
- All settings and data defined by programming.
other words, an SLT and a KTEL cannot exchange program settings.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700