Panasonic VB-44210G User Manual page 131

Section 700 - Operation
3. Hang up.
Related Programming
• FF1 (System): Call Forward No Answer Timer (CPC-AII and CPC-B
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
• FF3 (Extension): Permanent Call Forward Type (CPC-AII and CPC-B
• FF3 (Extension): Permanent Call Forward Extension (CPC-AII and CPC-
• FF10 (Speed Dial): System Speed Dial Numbers
• FF10 (Speed Dial): Personal Speed Dial Numbers
Considerations
• With CPC-A and CPC-B Versions prior to 2.0, calls cannot be forwarded
• In CPC-A and CPC-B Versions prior to 5.0, DND and Absence Messages
- Direct trunk calls (including DID/DNIS)
- Transferred trunk calls.
DBS-2.3/9.2-700
Version 3.1 or higher)
Version 3.1 or higher)
CPC-B Version 3.1 or higher)
Version 3.1 or higher)
B Version 3.1 or higher)
to an extension that already has call forwarding activated. In other words,
phone "A" can only forward to phone "B" if phone "B" is not forwarded.
Beginning with CPC-B Version 2.0, calls can be forwarded to extensions
that have call forwarding activated. For example, phone "A" can be
forwarded to phone "B," even if phone "B" is forwarded to voice mail.
cancel Call Forwarding.
Beginning with Version 5.0, calls to an extension with DND or Absence
Message turned on are treated differently, depending on whether they are
trunk or intercom calls: Intercom calls receive busy tone; trunk calls are
routed to the extension defined in permanent call forwarding.
The following types of incoming trunk calls follow permanent call forward
settings:
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-15