Panasonic VB-44210G User Manual page 192

Chapter 4. Key Telephone Features
7. Press the AUTO key.
8. Enter the Speed Dial number for the telephone number.
9. Repeat steps 7 and 8 for any additional Speed Dials to be chained.
10. Press the HOLD key.
11. Press the ON/OFF key.
To assign a DBS Feature Code to a One-Touch key:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the One-Touch key to be programmed.
4. Enter the feature code.
5. Press the HOLD key.
6. Press the ON/OFF key.
To assign an Outside Telephone Number to a One-Touch key:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Press the One-Touch key to be programmed.
4. Press CONF followed by the Pooled Trunk Access code (9, 81-86).
5. If a pause is required, press the REDIAL key.
4-76
The ON/OFF LED goes off.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
The ON/OFF LED goes off.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
This inserts a pause between the access code and the telephone number.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700