Panasonic VB-44210G User Manual page 29

Section 700 - Operation
6. Press AUTO to backspace and erase the existing name.
7. Use the dialpad sequences shown in Table 2-1 on page 2-10 to enter
8. To store your entry, press HOLD.
Note: The name does not change on the extension until the extension goes off
hook.
To assign text to Call Waiting/OHVA Text Replies (CPC-AII and CPC-
B Version 4.0 or higher):
1. Pick up the handset or press ON/OFF.
2. Press PROG.
3. Dial #5
4. Dial 1-5, depending on which text message you want to change.
5. Press AUTO to backspace and erase the existing name.
6. Use the dialpad sequences shown in Table 2-1 on page 2-10 to enter
7. To store your entry, press HOLD.
DBS-2.3/9.2-700
letters and/or numbers.
Press FLASH after each letter or number.
Press CONF to switch between numbers and letters.
letters and/or numbers.
Press FLASH after each letter.
Press CONF to switch between numbers and letters.
DBS Manual - Revised April 2000
Chapter 2. Attendant Features
2-9