Panasonic VB-44210G User Manual page 198

Chapter 4. Key Telephone Features
3. Dial the telephone number.
4. Complete the call and replace the handset.
To select a Pooled Trunk group that is not assigned to an FF key:
1. Press the ON/OFF key.
2. Enter the desired group number (81-86, 9).
3. Dial the telephone number.
4. Complete the call and replace the handset.
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF2 (Trunks): Pooled Trunk Access for Group "9"
• FF2 (Trunks): Pooled Trunk Access for Group "9"
• FF3 (Extension): Forced Least Cost Routing
• FF5 (Keys): FF Key Assignment
• FF8 (LCR) LCR Settings (all)
Considerations
• The LED of the ML or MCO key lights red and the phone issues busy tone
4-82
The number appears on the display.
The LED of the ML or MCO key goes off.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
• The phone issues outside dial tone.
• "CO TALK #XX" (Where "XX" is the line number) appears on the
display.
The number appears on the display.
when all lines in the same group are busy. (Those lines cannot be
accessed.)
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700