Msg (Message) Key - Panasonic VB-44210G User Manual

Appendix A. EX 1.0 Feature Update

MSG (Message) Key

Description
Programming
Page A-18
the analog device will automatically default to "1 second ON, 3 seconds
OFF."
Ring Patterns Not Applicable to Analog Device. The following ring
pattern addresses will not affect the analog device:
Analog Transfer Ring Pattern FF1 2# 1# 31# (0-6)#
SLT DISA Ring Pattern
Inbound Ring Pattern
Flash Interaction. Any disconnect signal sent to the analog port must be
greater than the SLT Flash Control; otherwise the disconnect signal will be
interpreted as a flash and the call will be placed on hold.
Programming Addresses That Affect the Analog Device. The following
addresses will control the analog device, but will not affect the digital key
telephone:
AEC Disconnect Duration
SLT Flash Control
SLT Onhook Flash Timer
AEC Disconnect
or 1)#
Analog Port on Large-Display Phone
or 1)#
Data Security on Analog Port
or 1)#
The MSG key on the VB-44225 Large-Display Phone adds the following
functionality to the phone:
• Auto-Callback. If a callback message has been left by another
extension, you can press the MSG key to place an automatic callback to
the extension that sent the message. If more than one callback message
has been received, pressing the MSG key will perform auto-callback in
the order received.
• Auto-Answer Voice Message. You can press the MSG key to
automatically access your voice mailbox. The phone will dial your
voice mailbox and send access codes (if programmed) for retrieving
messages.
See Section 400 - Programming (Appendix C) for more detailed
programming information.
DBS Manual - Revised April 2000
Section 700-Operation
FF1 2# 1# 34# (0 or 1)#
FF2 (Trunk)# 17# (0-9)#
FF1 2# 1# 35# (0-15)#
FF1 2# 1# 11# (0 or 1)#
FF1 3# 14# (0-6)#
FF3 (ExtPort)# 46# (0
FF3 (ExtPort)# 51# (0
FF3 (ExtPort)# 52# (0
DBS-2.3/9.2-700