Panasonic VB-44210G User Manual page 272

Chapter 6. SLT Features
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Replace the handset.
To use Screened Transfer when Onhook Transfer is disabled:
1. Flash the switchhook to place the outside call on hold.
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Dial "8."
5. Replace the handset.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Recall Timer for Extension-Transferred CO Calls
• FF1 (System): Recall Timer for Extension-Transferred Intercom Calls
Considerations
• You cannot transfer a call to an extension that has Do Not Disturb or
• You can transfer a call to an extension that has Call Forwarding activated.
6-16
The phone issues intercom dial tone.
The third party need only pick up the handset to speak to the outside line.
The phone issues intercom dial tone.
The EXT LED stops flashing and remains lit.
The third party need only pick up the handset to speak to the outside line.
Absence Message activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if phone "A" is covered to phone "B," calls that are
transferred to phone "A" will be forwarded to phone "B."
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700