Traffic Measurement - Panasonic VB-44210G User Manual

Chapter 2. Attendant Features

Traffic Measurement

(All Versions)
Description
An attendant phone can track the number of outgoing and incoming calls for
each outside line number, as well as the number of times each System Speed
Dial number is used. This information can be used to evaluate trunk usage
and control costs.
To view traffic measurments:
1. Press the ON/OFF key.
2. Press the CONF key.
3. Dial the traffic measurment code from the table below.
4. Press the ON/OFF key.
Table 2-3. Traffic measurement options
Operation
Check the number of outgoing calls made on an outside
line
Check the number of incoming calls to a specific trunk
Check the number of times a System Speed Dial number
was used:
Delete usage data:
Notes:
NN = CO line number (01-64); SS = System Speed Dial number (00-89 or 000-199)
2-24
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
"C" appears on the display.
For example, to check the number of outgoing calls made on an outside
line 01, enter "#90," then "01". If 1234 outgoing calls have been made,
"Outgoing01 1234" appears on the display.
Pressing the # key steps through the trunk and system speed dial numbers.
The ON/OFF LED goes off.
DBS Manual - Revised April 2000
Section 700 - Operation
Code Display
#90NN "OutgoingNN"
#91NN "Incoming NN"
#92SS "SYS-SPD SS"
#93 "Clear All Inform"
DBS-2.3/9.2-700