User Manual - Panasonic KX-TD308 Installation Manual

Features
Conditions
Programming References
Feature References
Operation References

-User Manual

Central Office or host PBX to access their features (External
Feature Access).
Function:
Used to perform the displayed function / operation.
FWD / DND (Call Forwarding / Do Not Disturb):
program Call Forwarding, set Do Not Disturb.
HOLD:
Used to place a call on hold.
INTERCOM:
Used to make or receive intercom calls.
MESSAGE:
Used to send a message or display current message.
MONITOR:
Used for a handsfree operation.
PAUSE:
Inserts a pause in a speed dial number. With an analog
proprietary telephone, it is used as the PROGRAM button.
PF (Programmable Feature):
to be a One-Touch Dialing, FWD / DND, SAVE, Account, CONF
(Conference) or Voice Mail Transfer button, as desired.
PROGRAM:
Used to enter / exit the Programming mode. With the
REDIAL:
Used for Last Number or Automatic Redial.
SAVE:
Used to store a dialed telephone number for Saved Number
Redial.
SHIFT: Used to access the second level of Soft button function.
Soft:
Pressing a Soft button performs the function / operation
appearing on the bottom line of the display.
SP-PHONE (Speakerphone):
Pressing the button causes the telephone to switch between handset
and handsfree operation.
TRANSFER:
Transfers a call to another extension or external
destination.
VOLUME:
Used to adjust the ringer, speaker, handset and headset
volume and the display contrast.
Certain buttons are equipped with light indicators (LED's) to show
l
line or feature status.
CO buttons can be classified according to the following three types:
l
Single-CO (S-CO) button / Loop-CO (L- CO) button
Section 4, System Programming
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Manual
Flexible CO Button Assignment
None
Refer to respective operating instructions.
Used to
This flexible button can be programmed
Used for a handsfree operation.
Features
B
3-23