Do Not Disturb Override - Panasonic KX-TD308 Installation Manual

COS Programming
4 7 0
Description
Selection
Default
Programming
Conditions
Feature References

Do Not Disturb Override

This program determines which Classes of Services (COS) are
allowed to perform Do Not Disturb (DND) Override.
COS number: 1 through 8, * (* =all COS)
l
Disable / Enable
l
All COS - Disable
1. Enter 507.
Display: 507 DND OVERRIDE
2. Press NEXT.
Display: COS NO?+
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
Keep pressing SELECT until the desired selection is
4.
displayed.
Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
Repeat steps 4 through 6.
7.
Press END.
8.
To assign all COS to one selection, press the 96 key in step 3. In this
l
case, the display shows the contents programmed for COS 1.
Program [601] "Class of Service" is used to assign a Class of Service to
l
each extension.
Section 3, Features
Do Not Disturb (DND) Override
System Programming 4-l 17