Reading Trace Data On-The-Fly In The Multi Trace - Fujitsu SOFTUNE F2 MC-16 User Manual

CHAPTER 2 DEPENDENCE FUNCTIONS

■ Reading Trace Data On-the-fly in the Multi Trace

Use the DISABLE MULTITRACE command to disable the trace function before reading trace data. Check
whether or not the trace function is currently enabled by executing the SHOW MULTITRACE command
with /STATUS specified, or by using the built-in variable %TRCSTAT.
To read trace data, use the SHOW MULTITRACE command; to search trace data, use the SEARCH
MULTITRACE command.
[Example]
>>SHOW MULTITRACE/STATUS
en/dis
buffer full
sampling
en/dis
buffer full
sampling
block no.
frame no.
frame no.
block no. = 1
00001
00002
00003
00004
120
>GO
= enable
= nobreak
= on
>>DISABLE MULTITRACE
>>SHOW MULTITRACE/STATUS
= disable
= nobreak
= end
= 1 to 20
= 00001 to 00639
>>SHOW MULTITRACE 1
address
-7 : 10109C
-6 : 10109C
-5 : 10109C
-4 : FF0120
.
.
data a-status d-status
109C --- -------
0000 EWA EXECUTE
0000 --- EXECUTE
0120 --- -------
.
.
Qst dfg level ext-probe
--- 1 11111111
2by @ 1 11111111
--- 1 11111111
--- 1 11111111
.
.