Fujitsu SOFTUNE F2 MC-16 User Manual page 130

CHAPTER 2 DEPENDENCE FUNCTIONS
■ Displaying All Machine Cycles (Specify /CYCLE.)
Detailed information at all sampled machine cycles can be displayed. In this mode, both single trace and
multi trace data can be displayed in almost identical formats. (In the multi trace mode, the local frame
number and block number are added.)
In this mode, data can be displayed in the following format. For further details, see the descriptions of the
SHOW TRACE, and SHOW MULTITRACE commands. In this mode, source is not displayed regardless of
the setup made using the SET SOURCE command.
116
Address
Hexadecimal
Step Number
Decimal, signed
>SHOW TRACE/INSTRUCTION
step no. address
\sub4:
-00194 : FF0106
-00193 : 000186
-00192 : 1010E6
-00191 : 000186
-00190 : FF0108
-00189 : FF010A
-00188 : 10001A
-00187 : 10001C
-00186 : FF010E
-00185 : 1010E2
-00184 : FF0111
-00183 :
>
Data access
internal read access : Read access to
internal write access : Write access to
external read access : Read access to
external write access : Write access to
Disassemble Description
Indecates instruction
executed
Data
Hexadecimal
-194
mnemonic
LINK #00
internal read access.
external write access.
internal write access.
ADDSP #F8
MOVL A,001A
external read access.
external read access.
MOVL @SP+04,A
external write access.
MOVL A,0016
** STANDBY ** : Hardware standby
** RESET **
** RESET **
** THOLD **
** UHOLD **
** WAIT **
** SLEEP **
internal memory
** STOP **
internal memory
external memory
external memory
Display of sequencer level
Indicates sequencer level
executed when trace sampled.
Indicates 0 if sequencer not
in use.
level
4
10F2 5
10F2 5
10E6 5
5
5
0000 5
4000 5
5
0000 5
Device Status
5
: Reset
: Tool hold
: User hold
: Ready pin input
: Sleep
: Stop