2.1.1.1
Boot ROM File Automatic Execution
The simulator debugger for F
file at the start of debugging.
■ Boot ROM File Automatic Execution
When the simulator debugger for F
then executed at the start of debugging. The Boot ROM file is stored in Lib\907\BootROM under the
directory where Workbench is installed.
The directory containing the Boot ROM file can be displayed using the [Project] - [Setup Project] menu, and
can be modified in the setup project dialog. In addition, it is also possible to automatically execute the Boot
ROM file during the debugger startup or reset of MCU. For details, see the "SOFTUNE Workbench
Operation Manual".
Notes:
• When MCU reset is performed in the simulator debugger, the PC value varies, as shown below,
depending on whether it is F
2
F
MC-16FX: Starting address of the Boot ROM file
Other than F
• As the simulator debugger does not support fixed boot vectors, it always jumps to the reset vector
after the execution of the Boot ROM file. For the operation after the execution of the Boot ROM file,
see the LSI Specification Manual.
2
MC-16FX automatically loads and executes the Boot ROM
2
MC-16FX is specified, the Boot ROM file is automatically loaded and
2
MC-16FX or not:
2
MC-16FX: Entry point in the target file (reset vector)
CHAPTER 2 DEPENDENCE FUNCTIONS
35