Sequential Break - Fujitsu SOFTUNE F2 MC-16 User Manual

2.3.4.4

Sequential Break

A sequential break is a function to abort a executing program, when the sequential
condition is met by event sequential control.
■ Sequential Break
It is a function to discontinue the program execution when the sequential condition consists by the sequential
control of the event. Use a sequential break when the event mode is set to normal mode using the SET
MODE command.
When a break occurs due to a sequential break, the following message is displayed on the Status Bar.
Break at Address by sequential break
For details of the sequential break function, refer to Section "2.3.5 Control by Sequencer".
■ Setting Method
The sequential break is controlled by the following method.
1. Set event mode (SET MODE)
2. Set events (SET EVENT)
3. Set sequencer (SET SEQUENCE)
CHAPTER 2 DEPENDENCE FUNCTIONS
157