Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual page 169

When the mobile computer scans and successfully decodes a single or multiple RD bar codes, the data encoded in
the bar code can:
•
Reset the mobile computer's connection profile. A connection profile is a set of Wireless Application
parameters that the mobile computer uses to access the wireless network.
•
Initiate downloads of one or more software packages from an FTP server to the mobile computer.
NOTE RD Client version 1.9.0 only recognizes AirBEAM software packages. See AirBEAM Smart Client on page
7-20 for more information.
To scan an RD bar code:
Obtain the appropriate RD bar code(s) from the MSP Administrator.
1.
Launch the RD application on the mobile computer. The
2.
Ready to Scan
No Bar Codes Left to Scan
Rapid Deployment Window
Figure 7-3
Scan the appropriate bar code(s) to complete the configuration and/or download.
3.
A PDF417 bar code (2-D bar code) can contain all download data in a single bar code. In this case, only
a.
one bar code may be required to scan.
Multi-part linear bar codes (1-D bar codes) can require scanning several bar codes. Bar codes can be
b.
scanned in any order. The text box under
(see Figure 7-7).
After all appropriate bar codes are scanned successfully, the mobile computer connects to the server and the
4.
Rapid Deployment Configuring
Rapid Deployment Window - Configuring
Figure 7-4
NOTE If the mobile computer cannot connect to the server, it continues to retry until the user cancels (exits) the
application. If failure to connect to the server persists, see the MSP Administrator.
When configuration is complete:
5.
Ready to Scan
Bar Codes Left to Scan are Listed
Bar codes left to scan...
window displays while network settings are configured.
Staging and Provisioning
window displays.
Rapid Deployment
shows the remaining bar codes to scan
7 - 3