Band Selection; System Options - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

6 - 38 MC3000 Integrator Guide
Regulatory Options Dialog Box
Figure 6-46
Regulatory Options
Table 6-24
Field
Settings
Enable 802.11d

Band Selection

The
Band Selection
to the 802.11 standard networks.
Band Selection Dialog Box
Figure 6-47
Band Selection Options
Table 6-25
Field
2.4GHz Band
5GHz Band
Tap to save the settings or tap
Save

System Options

Use the system options to set miscellaneous system setting.
Select the country of use from the drop-down list. In order to connect to a profile, the profile
country must match this setting, or the AP country setting if the
selected.
With this check box selected, the WLAN adapter attempts to retrieve the country from APs.
Profiles which use
Infrastructure
as the AP country settings or if the profile country setting is set to
this box requires that ALL APs be configured to transmit the country information.
settings identify the frequency bands to be scanned when finding WLANs. These values refer
With this box checked, the
GHz band (802.11b and 802.11g).
With this box checked, the
band (802.11a).
to discard any changes.
X
Description
mode are only able to connect if the country set is the same
Description
application list includes all networks found in the 2.4
Find WLANs
application list includes all networks found in the 5 GHz
Find WLANs
check box is
Enable 802.11d
. Check
Allow Any Country