On-Demand Staging - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

7 - 6 MC3000 Integrator Guide
Rapid Deployment Window - Processing Profile
Figure 7-8
When staging is complete the
5.
Staging Complete Window
Figure 7-9
Press the left function key to exit the
6.

On-Demand Staging

The MSP 3.X
RD Client
Staging (Electronic Staging).
When using On-Demand Staging, the RD Client pulls staging profiles directly from an On-Demand Profile Server
over some form of pre-configured or automatically-configured IP connection. The following types of IP connection
modes are currently supported for Electronic Staging:
ActiveSync Connection Mode
This mode uses the IP connection that is established when the mobile computer is directly connected (via a USB
cable, serial cable or cradle) to a host computer running ActiveSync. The most common scenario would be where
the On-Demand Profile Server is running on the host computer to which the mobile computer is connected via
ActiveSync. It would, however, also work with the On-Demand Profile Server running on any other host computer
that is on the same subnet as the host computer to which the mobile computer is connected via ActiveSync.
Ethernet Cradle Connection Mode
This mode uses the IP connection that is established when a mobile computer is inserted into an Ethernet cradle
that is plugged into the Ethernet LAN. Some mobile computers come ready to use with Ethernet cradles while
STAGING COMPLETE
RD Client
also enables staging without having to scan bar codes through the use of On-Demand
window displays.
.