8 - 6
MC3000 Integrator Guide
Four Slot Ethernet Cradle
Table 8-4
Troubleshooting the Four Slot Ethernet Cradle
Problem
Mobile computer amber
Charge LED Indicator does
not light when mobile
computer inserted.
Mobile computer battery is
not charging.
During data
communication, no data
was transmitted, or
transmitted data was
incomplete.
Four Slot Spare Battery Charger
Table 8-5
Troubleshooting the Four Slot Spare Battery Charger
Problem
Spare Battery
Charging LED does
not light when spare
battery is inserted.
Cause
Cradle is not receiving power.
Mobile computer is not correctly
seated.
Mobile computer was removed
from cradle or cradle was
unplugged from AC power too
soon.
Battery is faulty.
The mobile computer is not fully
seated in the cradle.
Mobile computer removed from
cradle during communication.
Incorrect cradle setup.
Ethernet connection error. Link
LED is not lit (see Link LED on
page 2-11).
Cause
Spare battery is not
Remove and re-insert the spare battery into the charging slot,
correctly seated.
ensuring it is correctly seated.
Solution
Ensure the power cable is connected securely to
both the cradle and to AC power.
Remove and re-insert the mobile computer into the
cradle, ensuring it is correctly seated.
Ensure cradle is receiving power. Ensure mobile
computer is seated correctly. If the mobile
computer battery is fully depleted, it can take up to
four hours to fully recharge a Standard Battery and
it can take up to six hours to fully recharge an
Extended Life Battery.
Verify that other batteries charge properly. If so,
replace the faulty battery.
Remove and re-insert the mobile computer into the
cradle, ensuring it is correctly seated.
Replace mobile computer in cradle and retransmit.
See
Chapter 2, Accessories
Troubleshoot the Ethernet connection.
Solution
for cradle setup.