1 - 16 MC3000 Integrator Guide
Strap/Door Assembly Removal and Replacement (MC3090G)
The Strap/Door Assembly consists of a hand strap and the battery door. Before removing the Strap/Door Assembly,
press the red
Power
To remove the Strap/Door Assembly:
Slip the button through the loop.
1.
Remove loop section from handle.
2.
Rotate the latches to the open position.
3.
CAUTION
Do not lift up on the latches when removing the Strap/Door Assembly. Lift up on the hand strap only.
Lift the hand strap to lift the Strap/Door Assembly off, bottom first.
4.
Reverse the procedure to replace the Strap/Door Assembly.
Button
Latches
Strap/Door Removal and Replacement (MC3090G)
Figure 1-13
button to turn off the screen and set the mobile computer to suspend mode.
Loop
0.5 in.
(12.7 mm)
Strap/Door
Assembly