Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual page 173

others require software to be installed and configured before an Ethernet cradle connection can be established.
The RD Client does not do anything to install Ethernet cradle software or configure or establish an Ethernet cradle
connection, but does use one if it exists. The On-Demand Profile Server must be running on a host computer that
is on the same subnet to which the Ethernet cradle is connected.
Already existing IP Connection Mode
This mode uses any IP connection that is already active on the mobile computer. This could be a direct Ethernet
port (if available), or a WLAN connection that was configured and established before the
could also be any other form of IP connection that might be available on the mobile computer. The
not do anything to configure or establish such connections, but uses them if they exist. The On-Demand Profile
Server must be running on a host computer that is on the same subnet that is accessible from the connection.
Well-known WLAN Connection Mode
This mode works only on supported Motorola WLAN adapters. The
WLAN IP connections using pre-defined Motorola WLAN settings. If the
and establish such a connection, and if an On-Demand Profile Server is running on a host computer that is on the
same subnet that is accessible from the connection, then Electronic Staging proceeds using that connection.
To perform On-Demand Staging:
In the menu, press the center function key to launch the
1. App Launcher
window displays.
Waiting for Bar Codes
Figure 7-10
Tap . The
2. Options Main Menu
RD Client Main Menu
Figure 7-11
window appears.
Staging and Provisioning
RD Client
attempts to configure and establish
RD Client
is able to successfully configure
RD Client
. The
RD Client Scan Barcodes To Deploy
7 - 7
was launched. It
does
RD Client