Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual page 98

4 - 14 MC3000 Integrator Guide
For downloads using either a serial or a USB connection, connect the mobile computer to the development
1.
computer using the Single Slot Serial/USB cradle or MC3000 Communication/Charge cables.
NOTE The cradle or Communication/Charge cable must be connected with the appropriate power supplies and
connected to a power source for the mobile computer to reset into IPL.
On the 28-key, 38-key and 48-key keypads:
2.
Press and simultaneously hold the scan button or trigger, the
a.
Continue to hold the scan button or trigger while releasing the
b.
computer resets into IPL.
On the 20-key keypad:
3.
Press and simultaneously hold the scan button or trigger, the
a.
Continue to hold the scan button or trigger while releasing the
b.
computer resets into IPL.
When the
4. Initial Program Loader
Initial Program Loader
Platform
Application
Config Block
Windows CE
Monitor
Splash Screen
Power Micro
Partition Table
Command File
System Reset
Auto Select
Initial Program Loader Menu
Figure 4-9
CAUTION To ensure a successful download, do not remove power from the mobile computer while in IPL mode.
Choose
1. Auto Select
IPL Menu Partitions
Table 4-4
Partition Name
Platform
Application
Config Block
menu appears, release the Scan button or trigger.
or use the up and down scroll buttons to select the partition to download, then press
Contains the files in the Platform folder.
Contains the files in the Application folder.
Contains information to correctly configure the operating system for the mobile computer.
This information is loaded by the manufacturer.
Note: Ensure that an incorrect config block is not loaded into the mobile computer. Loading
an incorrect config block prevents the correct operation of the mobile computer.
, and keys.
1 9 Power
, and keys until the mobile
1 9 Power
, , and keys.
1 9 MENU Fn
, , and
1 9 MENU Fn
Description
keys until the mobile
.
Enter