Pc (Power Cycle) - NEC Express5800 1160Xd User Manual

PC (Power Cycle)

This command turns off the power (DC) of the system, and then turns it on again to
start up the system.
Note:
operation state of the OS or BIOS and without notifying either.
Screen Image
iSPyz:---> pcENTER>
CAUTION:
System power will be turned off without any notice to the softwares even if they are
running.
Enter partition number (0-37all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
PC command was accepted. System power of all partitions will be turned off soon and
then will be turned on.
[iSPyz:INFO.ccc] partition 0 : power off sequence started.
[iSPyz:INFO.ccc] partition 1 : power off sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power off sequence completed normally.
:
[iSPyz:INFO.ccc] partition 0 : power on sequence started.
[iSPyz:INFO.ccc] partition 1 : power on sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power on sequence completed normally.
:
[iSPys:INFO.ccc] partition 1 : handed off the control to BIOS.
Reference
A
B
C
D
This command turns off the system regardless of the
Table 3-43. PC Display Screen
Table 3-44. PC Display Screen References
Description
Enter a partition number
If you select "all", all the configured partitions become the targets.
However, the partitions that are already OFF do not become the targets
Displays the confirmation message.
To execute, enter "y."
Displays the PC command acceptance message.
The actual process runs in the background.
Displays the state of the process running tin the background.
NML MNT m
X X X
Service Processor 3-55
b u
Reference
A
B
C
D