DP (System Dump)
This command generates a dump interrupt in the system.
The actual operation of the dump processing and the following system reset depend on
the software (OS or BIOS). This command only generates a dump interrupt.
Obviously, nothing happens if no software is running.
Screen Image
iSPyz:---> dp<ENTER>
Dump button interrupt will be generated.
Enter partition number (0-7/all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
DP command was accepted. Dump button interrupt will be generated soon.
[iSPyz:INFO.ccc] partition 0 : dump button interrupt.
[iSPyz:INFO.ccc] partition 1 : dump button interrupt.
:
:
:
Reference
A
B
C
D
Table 3-27. DP Screen
Table 3-28. DP Screen References
Description
Enter a partition number.
If you select "all," al configured partitions become the targets.
Displays the confirmation message.
To continue, enter "y".
Displays the command acceptance message.
The actual process runs in the background.
Displays the state of the process running in the background.
NML
MNT
m
X
X
X
Service Processor 3-25
b
u
Reference
A
B
C
D