Rs (Cold Reset System) - NEC Express5800 1160Xd User Manual

RS (Cold Reset System)

This command performs a cold reset of the system.
Note:
even if the OS (BIOS) is running.
Screen Image
iSPyz:---> rsENTER>
CAUTION:
System will be reset without any notice to the softwares even if they are running.
Enter partition number (0-3/all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
RS command was accepted. All partitions will be resetted soon.
[iSPyz:INFO.ccc] partition 0 : initializing HW.
[iSPyz:INFO.ccc] partition 1 : initializing HW.
:
:
:
[iSPyz:INFO.ccc] partition 0 : handed off the control to BIOS.
[iSPyz:INFO.ccc] partition 1 : handed off the control to BIOS.
Reference
A
B
C
D
3-56 Service Processor
This command performs a reset without any notification
Table 3-45. RS Display Screen
Table 3-46. RS Display Screen References
Description
Enter a partition number
If you select "all", all the configured partitions become the targets.
However, the partitions that are already OFF do not become the targets
Displays the confirmation message.
To execute, enter "y."
Displays the RS command acceptance message.
The actual process runs in the background.
Displays the state of the process running tin the background.
NML MNT m
X X X
b u
Reference
A
B
C
D