Selecting A Slot - NEC Express5800 1160Xd User Manual

Selecting a Slot

Installation can impact the operating frequency of a board. Note the following
information before selecting a PCI slot:
Note:
Table 5-2 for PCIX Unit slot locations and addressing. These
tables and figures show slot frequencies, bus groups, and
slot addressing information.
The actual operating frequency of a board is lower than the highest specified
operating frequency when the following conditions occur:
!
More than two PCI boards are installed in the same bus group (does not
apply to PCI-X boards)
!
Boards with different operating frequencies are installed in the same bus
group.
PCI 33-MHz is the highest specified operating frequency for the following
boards:
!
Basic I/O Board
!
SCSI Card DAT device in the server chassis.
See Table 5-3 for information about how installation in a particular slot and with
other boards can determine the operating frequency of boards within the bus
group. Also see Table 5-2 for PCI slot addressing in the PCIX unit.
Table 5-3. Board Installation and Operating Frequencies
Board Type Installation
PCI 33-MHz Installed within the same bus group with other
board boards having a higher operating frequency than
33-MHz
PCI 66-MHz Up to 2 boards installed within the same bus group
board
Three or more boards installed within the same bus
group
PCI-X 66-MHz All slots within the same bus group are occupied
board with PCI-X 66-MHz boards
PCI-X 133-MHz Installed in 66-MHz slot
board
See Figure 5-1, Table 5-1, Figure 5-2, and
Operating Frequency
Operating frequency of all boards
is 33 MHz.
Operating frequency of boards is
66 MHz.
Operating frequency of all boards
is 33 MHz.
Operating frequency of all boards
is 66-MHz.
Operating frequency does not
decrease as in PCI examples.
Operating frequency is limited to
66 MHz; installation in 66-MHz
slot is not recommended.
I/O Board Installation 5-5