Sp Command Reference - NEC Express5800 1160Xd User Manual

SP Command Reference

The following sections provide detailed information about SP commands.
The description for each command lists whether the command can be executed in
Normal or Maintenance mode, whether it can be executed in the master, backup, or
undetermined iSP.
For example:
NML:
MNT:
m:
b:
u:
In the above example, the command can be executed in both the Normal mode and
Maintenance mode only if the iSP is in the master state.
Basically, SP commands and subcommands are not case-sensitive. Any need for case-
sensitivity (for example, accounts and passwords) is described.
NML MNT m b
X X X
"X" indicates that the command can be executed in Normal mode.
"X" indicates that the command can be executed in Maintenance mode.
"X" indicates that the command can be executed in the master iSP.
"X" indicates that the command can be executed in the backup iSP.
"X" indicates that the command can be executed in the undetermined (master or
backup) iSP.
u
Service Processor 3-17