Rs (Cold Reset System) - NEC 1080Xd User Manual

RS (Cold Reset System)

Execution:
This command can be executed on a partition in the following state:
!
Automatic startup completed
!
Execution of UP command.
The partition is in a DC POWER ON state.
Function:
Performs a cold reset of the system.
Note:
even if the OS (BIOS) is running.
Note:
Maintenance mode.
Screen Image
iSPyz:---> rsENTER>
CAUTION:
System will be reset without any notice to the softwares even if they are running.
Enter partition number (0-3/all/CR=exit) : all<ENTER>
Execute OK? (y/[n]) y<ENTER>
RS command was accepted. All partitions will be resetted soon.
[iSPyz:INFO.ccc] partition 0 : initializing HW.
[iSPyz:INFO.ccc] partition 1 : initializing HW.
:
:
:
[iSPyz:INFO.ccc] partition 0 : handed off the control to BIOS.
[iSPyz:INFO.ccc] partition 1 : handed off the control to BIOS.
Reference
A
B
C
D
This command performs a reset without any notification
The RS command can be executed in Normal mode or
Table 3-45. RS Display Screen
Table 3-46. RS Display Screen References
Description
Enter a partition number
If you select "all", all the configured partitions become the targets.
However, the partitions that are already OFF do not become the targets
Displays the confirmation message.
To execute, enter "y."
Displays the RS command acceptance message.
The actual process runs in the background.
Displays the state of the process running tin the background.
Reference
A
B
C
D
Service Processor 3-57