Os (Bios) Console - NEC 1080Xd User Manual

OS (BIOS) Console

When you select the OS (BIOS) Console on the iSP Main Menu, input/output is
redirected to the OS (BIOS) serial controller.
To return to the Main Menu, press
The image displayed and the operation during redirection depend on the BIOS and OS
running in the partition; they are therefore not recognized by the service processor
firmware (iSPFW).
Screen Image
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING )
1) OS(BIOS) serial console of partition#1 (RUNNING
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSPyz> 0<ENTER>
*****redirection of serial console 0
*****enter CTRL+B to quit
<CTRL>+<B>
*****returned from serial console 0 redirection *****
Table 3-7. Login and Main Menu Screen References
Reference
A
B
C
D
E
3-8 Service Processor
Table 3-6. OS (BIOS) Console Operation
:
:
:
:
:
Description
When you enter 0-3, the menu is redirected to the OS Console of the corresponding
partition.
The starting message of OS Console redirection is displayed.
":" is input and output during the OS Console redirection depend on the OS and
BIOS.
Pressing ^B terminates the redirection of the OS Console.
A message is displayed to indicate the end of the redirection. Returns to Main Menu.
(CTRL+B).
^B
*****
*****
Reference
)
A
B
C
D
E