NEC 1080Xd User Manual page 54

Table 3-2 lists the login account and login password default values for entering the
Main Menu and using menu functions.
Login Type
Login Account
Login Password
Note:
to five connections to the Virtual SOP in the entire system, and only
one prime connection to the SP Command Console in the entire
system can be made simultaneously. If LAN is used, additional SP
Command Consoles can be attached using hubs, but they will be in
monitor mode only, and commands can be entered only via the
prime connection.
See Figure 3-2 for a diagram of using console modes.
3-4 Service Processor
Table 3-2. Login Account and Password Defaults
Only one connection to the OS Console per partition, up
Defaults
spfw
nec