6. Press
Esc
processor) login prompt appears.
7. Enter the login name
password are default values.) The iSP Main Menu screen appears (see
Figure 2-6).
8. At the iSPyz prompt, enter the iSP command
mode.
9. Press
Esc
Integrated Service Processor.
Cabinet-ID:xx, Location:y, State:ssssss
iSP login: spfw<ENTER>
iSP password: xxxxxxxx<ENTER>
Copyright (C) 2002 NEC Corporation, All Rights Reserved.
Welcome to Integrated Service Processor.
iSP FW version : 01.00 generated on 01/31/2002 19:20:33
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING)
1) OS(BIOS) serial console of partition#1 (RUNNING)
V) Virtual System Operator Panel
S) iSP commands
E) Exit
iSPyz> s
***** SP Command Mode
***** enter ESC to do the command input effectively
***** enter CTRL+B to quit
iSPyz:--->
Figure 2-6. SP Console Screen – SP Firmware Activated
2-6 System Operation
on the service processor (SP) keyboard. The iSP (service
spfw
and password
.
nec
. (The login name and
to enter the SP command
s
****
*****
*****