Fv (Firmware Versions) - NEC 1080Xd User Manual

FV (Firmware Versions)

Execution:
This command can be executed in the AC POWER ON or DC POWER ON state.
Function:
Displays the version information of the iSPFW and BIOS.
Performs a checksum of the storage area.
Note:
Maintenance mode.
Screen Image
iSPyz:---> fv<ENTER>
Firmware Versions : (currently running firmware is Rxx.xx)
iSP BOOT
iSP FW bank0
iSP FW bank1
BIOS bank
Do you want to check the flash memory? (y/[n]) : y<ENTER>
checking iSP BOOT bank...
passed.
checking iSP FW bank0...
passed.
checking iSP FW bank1...
passed.
checking BIOS bank...
passed.
FV command terminated.
Reference
A
B
C
The FV command can be executed in Normal mode or
Table 3-32. FV Screen
(*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
: xx.xx generated on mm/dd/yyyy hh:mm:ss
(*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
(*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
Table 3-33 FV Screen References
Description
Displays the state of the current FW storage area.
To perform a checksum test of the storage area, enter "y".
Displays the state of the checksum test.
Reference
A
B
C
Service Processor 3-31