He (Help) - NEC 1080Xd User Manual

HE (Help)

Execution:
This command can be executed in the AC POWER ON or DC POWER ON state.
Enter HELP or HE to execute this command.
Function:
Displays the list of commands.
The list of commands differs for Normal Mode and Maintenance Mode.
Note:
Maintenance mode.
Screen Image
iSPyz:---> heENTER>
iSP commands :
System Control (both customers and maintenance persons)
DF – Shut down the system (override)
DN – Shut down the system
DP – Generate the system dump interrupt
PC – Power cycle
RS – Cold reset the system
UP – Bring up the System
Configuration (both customers and maintenance persons)
HC – Hardware configuration and partitioning
Miscellaneous (both customers and maintenance persons)
CM – Change SP command mode
DL – Display SP logs
DT – SP Date and Time
EN – Display environmental information
FV – Display firmware versions
HE – Display this help
ML – Display message log
HE command terminated.
A: Displays help for Normal Mode commands.
3-52 Service Processor
The HE command can be executed in Normal mode or
Table 3-40. HE Display Screen
Reference
A