Dat Cartridge Labels; Write Protection - NEC 1080Xd User Manual

DAT Cartridge Labels

Use the following labeling information:
!
Place labels securely on the DAT cartridge in the position shown in
Figure 2-17. Be sure to write the start date of DAT cartridge use on the
attached Index label.
!
If you need to change the contents for the DAT, replace the label with a
new one. (Do not erase the label contents.) Be sure to remove the old
label before attaching the new label.
!
If you use a label other than the specified INDEX label, be sure the label
size is correct, the label can be easily replaced, and the label doesn't leave
adhesive after removal.
NEC
Figure 2-17. Digital Audio Tape Label Positions

Write Protection

You can protect written data on the audio digital tape from being erased. To
protect the data, open the write protect slider on the label side of the digital
audio tape cartridge (see Figure 2-18).
To write or overwrite data on the digital audio tape, close the write protect
slider.
System Operation 2-21