NEC 1080Xd User Manual page 57

Table 3-4. Login and Main Menu Screen References
Reference Description
A "xx "is the ID for identification of a cabinet in a system composed of multiple
cabinets.
("xx" is the system number specified by the SU command.)
"y" indicates the installation location of the service processor - clock board with 0.
"ssssss" becomes "master."
B Entry for login account and password.
The password is not displayed.
C Display of service processor firmware (iSP FW) version information.
D Display of iSP Main Menu options.
The OS Console menu also displays a partition state summary.
E Display of the iSP Main Menu selection prompt.
"y" indicates the service processor-clock board number for 0.
"z" becomes "m."
Table 3-5. Main Menu Login Events and Operations
Event
The account or password is invalid.
The account or password is invalid three times
in a row.
Left for 5 minutes in login or password prompt
state.
A character not on the menu is entered.
Left for 5 minutes in menu display state.
0 – 3 selected.
S selected.
V selected.
E selected.
DISCONNECTALL selected.
The number of simultaneous connections
allowed for the selected menu is exceeded.
Operation
Displays "incorrect" and then displays the login
prompt again.
Disconnects the session.
Displays "timeout" and then disconnects the
session.
Displays the menu again.
Displays "timeout" and then disconnects the
session.
Switches to the OS (BIOS) serial console
redirection.
Switches to the SP Command Console.
Switches to the Virtual SOP.
Disconnects the session.
Disconnects all connections with the service
processor except the current connection.
This operation occurs only in special situations
(such as the case where a connection with the
service processor was actually disconnected but
remains under service processor management due
to irregular access of a client to the service
processor; as a result, any further operation cannot
be performed).
After a DISCONNECTALL is selected,
authentication with Maintenance Mode is performed.
Displays "N connections to the selected mode are
already established. Try it later." Displays the Main
Menu again.
Service Processor 3-7