SpO
9
Activating SpO
There are three preset high/low SpO
Press SpO
alarm option. Stop when you see the alarm you would like to choose and
after three seconds that alarm will take effect. A
limits to show that the alarm is active. To review the limit set, press SpO
alarm.
If the SpO
violated limit is highlighted.
SpO
NOTE
Deactivating SpO
Press SpO
indicates that the alarms are off.
Recorder Output
After an alarm event, the recorder prints a strip. The bottom of the strip
shows the alarm violation, and the top of the strip shows the SpO
You may print an event summary record, which contains SpO
as described in "Printing the Event Summary Record" on page 5-12.
9-10
Alarms
2
SpO
Alarms
2
Alarms
2
alarm repeatedly to cycle through the alarm options and the no-
2
level falls below the low alarm limit, an alarm sounds and the
2
alarms are automatically turned off when you press Charge.
2
alarm. The
2
alarm limits: 100/90, 100/85 and 100/80.
2
Alarms
2
symbol to the right of the SpO
symbol replaces the
2
display
2
reading.
2
information,
2