Preparing The Leads For Monitoring; 3-Wire Patient Cable - HP Codemaster 100 User Manual

Preparing the Leads for Monitoring

You can configure the HP CodeMaster 100 to use either a 3-wire, 5-wire, or
10-wire patient cable (with the 12-Lead option). Use the procedure as
described in Table 2-2 on page 2-12 to set up the patient cable type (3-wire, 5-
wire, 10-wire).

3-Wire Patient Cable

Table 5-2 describes typical lead-wire placement using the 3-wire patient
cable. Table 5-3 shows how the individual leads are formed using the
individual leadwires.
Table 5-2 3-Wire Electrode Placement
Electrode
Table 5-3 Lead Formation
Lead
Placement
+
Using Leads to Monitor
ref
5-3