Battery Capacity Test - HP Codemaster 100 User Manual

Battery Capacity Test

Perform a battery capacity test every 90 days or when the
(
system for charging.
1 Insert the battery into charging bay. The
2 Press the start button(
3 Record the date of the test on the bottom of the battery.
If the
WARNING
the battery from service immediately and notify service personnel.
The battery support system will automatically charge and recondition
NOTE
batteries during the capacity test.
Dispose of equipment and accessories at the end of their useful life in
NOTE
accordance with local and national laws.
) flashes after you insert the battery pack into the battery support
(the READY indicator may appear instead).
CHARGING (or READY
approximately 24 hours.
Battery capacity testing is complete when the PASS indicator appears.
indicator appears, the battery did not pass the test. Remove
FAULT
CHARGING
). The TESTING indicator appears and the
) indicator disappears. Testing the battery takes
CodeMaster 100
START indicator
indicator appears
13-15