Setup Automated Operations - HP Codemaster 100 User Manual

Table 2-3 Remote Sites, Transmission Types, and Recommended Speeds
Receiver Type
6
Press F5 twice to exit the directory and return to the Configuration Menu.

Setup Automated Operations

This field allows you to configure the steps to send ECGs after acquisition.
If you enter Yes into this field, the device will automatically go to the telephone
directory immediately after an ECG is acquired. In this case, you will not be
required to push the Send button until after you have selected the site for which the
ECG is to be sent. This automated function removes one step in the process for
sending an ECG.
If you enter No into this field, the instrument will return to the Home screen after an
ECG is acquired. To send an ECG, you will always be required to push the Send
button to enter into the telephone directory. Once you are in the telephone directory,
select the site for which the ECG is to be sent and push the Send button again.
Configuring the 12-Lead Option
Recommended Speed
2-29