Combination Of Buttons - Epson Stylus Pro 4000 Reference Manual

9 Paper check light
(red)

Combination of buttons

This section describes the function when several buttons are
pressed at the same time.
Buttons
1. Power button
2. Pause button
On:
No paper is loaded in the paper tray when
Sheet is selected as the paper source.
Roll paper is out when Roll Auto Cut On
Roll Auto Cut Off
source.
Selected paper source (Roll Auto Cut On
/Roll Auto Cut Off
the paper source in the printer driver.
Paper lever is in the released position.
The loaded paper is too thick for head
cleaning.
Flashing:
Paper is jammed.
Paper is not cut correctly after print job when
paper source is set as Roll Auto Cut On
Paper is not loaded straight.
Paper is not detected.
Cut sheet is not ejected correctly.
Function
If the printer is turned on while pressing and
holding Pause button, the printer enters
Maintenance Mode.
is selected as the paper
/Sheet ) does not match
The Control Panel
1
or
1
1
1
.
1
1
1
1
1
1
1
1
15